|
sleeves for M6 bolts
|
|
31-07-2011, 11:03 PM
(This post was last modified: 01-08-2011, 09:16 AM by AlanBeckett.)
Oh, dear. Sticking a bit of 10mm stock in the lathe and drilling it 6mm is a 10 minute job.
How much do you need? Come on Col, me or you? Alan |
| Messages In This Thread |
|
sleeves for M6 bolts - by Pamphonica - 31-07-2011, 08:11 PM
RE: sleeves for M6 bolts - by Retired - 31-07-2011, 08:44 PM
RE: sleeves for M6 bolts - by Pamphonica - 31-07-2011, 09:03 PM
RE: sleeves for M6 bolts - by AlanBeckett - 31-07-2011, 11:03 PM
RE: sleeves for M6 bolts - by Pamphonica - 01-08-2011, 08:29 AM
RE: sleeves for M6 bolts - by Retired - 01-08-2011, 08:35 AM
RE: sleeves for M6 bolts - by AlanBeckett - 01-08-2011, 09:22 AM
RE: sleeves for M6 bolts - by Retired - 01-08-2011, 03:17 PM
RE: sleeves for M6 bolts - by AlanBeckett - 01-08-2011, 05:00 PM
|
| Users browsing this thread: |
| 1 Guest(s) |
