28-07-2011, 01:59 PM
Happy to report this is now working well on both wavebands, dirty wavechange switch was the problem
Also managed to repair the original speaker. When the magnet was off there was rust on the mating faces and touching the cone. With this cleaned off. I set about realigning the magnet, then put it on the set and tested, away it went!
just waiting for the baffle board glue to set then back together.
cheers Mark
Also managed to repair the original speaker. When the magnet was off there was rust on the mating faces and touching the cone. With this cleaned off. I set about realigning the magnet, then put it on the set and tested, away it went!
just waiting for the baffle board glue to set then back together.
cheers Mark
Keep on Fiddling!
