16-07-2011, 09:06 PM
Hi Andrew,
Overheating of the mains transformer could be caused by a shorted turn in the copper windings.
Have you checked to see if there are any voltage adjustment links on the Primary (input) side of the transformer? Some sets have a voltage selector which may have been set to a lower mains voltage e.g. 210V.
Kind regards,
Roger.
Overheating of the mains transformer could be caused by a shorted turn in the copper windings.
Have you checked to see if there are any voltage adjustment links on the Primary (input) side of the transformer? Some sets have a voltage selector which may have been set to a lower mains voltage e.g. 210V.
Kind regards,
Roger.
