08-07-2011, 02:08 PM
My DLink router has been rock-solid, apart from 1 problem caused by a failing power supply. Before you get involved with length faulty-finding at a "computer/firmware/software" level, I would urge you to test the router with a known-good PSU. In my case, I used a bench power supply. I was surprised at how much the current consumption jumped about, and this explained the problems I was getting....
Also, have a look inside the router for bulging capacitors, etc...
Of course, you could change your broadband to another ISP and get a new router as part of the deal. Personally, I have had bad dealings with TalkTalk in the past, but would highly recommend PlusNet (as do many other people on here and on the UKVRRR forum). If you tell them about me when you sign up, I'll get 25 pence off my monthly bill
I do have a Netgear router standing by as a spare, but haven't felt the need to try it yet. Oh, and make sure nothing is standing on the router - do everything you can to keep it running cool. Eventually, mine will end up in the cellar, which is always cold.
Hope you get the chance to read this
Mark
Also, have a look inside the router for bulging capacitors, etc...
Of course, you could change your broadband to another ISP and get a new router as part of the deal. Personally, I have had bad dealings with TalkTalk in the past, but would highly recommend PlusNet (as do many other people on here and on the UKVRRR forum). If you tell them about me when you sign up, I'll get 25 pence off my monthly bill
I do have a Netgear router standing by as a spare, but haven't felt the need to try it yet. Oh, and make sure nothing is standing on the router - do everything you can to keep it running cool. Eventually, mine will end up in the cellar, which is always cold.
Hope you get the chance to read this
Mark
