21-03-2011, 03:54 PM
Mark
The heat generated will be much the same regardless of the voltage setting, so as long as you work within the regulator's limits there should be no need for additional cooling. All such regulators run hot, most have a built-in thermal regulation circuit and will shut down if overloaded (but check on this). It is also possible to run two regulators in parallel, I believe. The data is available by download, google search needed.
-Tony
The heat generated will be much the same regardless of the voltage setting, so as long as you work within the regulator's limits there should be no need for additional cooling. All such regulators run hot, most have a built-in thermal regulation circuit and will shut down if overloaded (but check on this). It is also possible to run two regulators in parallel, I believe. The data is available by download, google search needed.
-Tony
