Yesterday, 10:08 AM
I doubt it.
Aluminium foil was produced since 1910, though real tin foil was available till the 1940s. Thin enough tin would too easily break in winding as it not as malleable.
Aluminium was known from about 1824 but not industrially available till 1890s (maybe 1888).
There might have been some tin foil and paper capacitors between 1900 and 1914?
By the 1920s and domestic radio they were likely all aluminium foil. Not sure if Mica caps always used silver, but the USA mica caps made differently and suffered failure.
Plastic dielectrics available from late 1930s, but did replace cheaper paper till early 1960s. Telephone multipair and mains used to use paper insulation and the printed pair coding spacing varied so every pair equally affected. The ends sealed. Paper mains cable used lead sheaths, soldered to make hermetic at joints and tarred ends. I encountered it once, actually live, in the early 1970s. Replaced by rubber at least in the 1920s. BBC still had some paper insulated voice circuits in the mid 1970s, inc an undersea cable from Scotland to NI (maybe Portpatrick to Donaghadee).
See also lead flashing, still called that by people selling you roof repairs.
"Hasn't it been zinc for a long time," I suggest.
"People are familiar with the term," he says.
Amazingly, lead flashing is still available. Confusingly most zinc flashing is an alloy though pure zinc flashing exists.
Aluminium foil was produced since 1910, though real tin foil was available till the 1940s. Thin enough tin would too easily break in winding as it not as malleable.
Aluminium was known from about 1824 but not industrially available till 1890s (maybe 1888).
There might have been some tin foil and paper capacitors between 1900 and 1914?
By the 1920s and domestic radio they were likely all aluminium foil. Not sure if Mica caps always used silver, but the USA mica caps made differently and suffered failure.
Plastic dielectrics available from late 1930s, but did replace cheaper paper till early 1960s. Telephone multipair and mains used to use paper insulation and the printed pair coding spacing varied so every pair equally affected. The ends sealed. Paper mains cable used lead sheaths, soldered to make hermetic at joints and tarred ends. I encountered it once, actually live, in the early 1970s. Replaced by rubber at least in the 1920s. BBC still had some paper insulated voice circuits in the mid 1970s, inc an undersea cable from Scotland to NI (maybe Portpatrick to Donaghadee).
See also lead flashing, still called that by people selling you roof repairs.
"Hasn't it been zinc for a long time," I suggest.
"People are familiar with the term," he says.
Amazingly, lead flashing is still available. Confusingly most zinc flashing is an alloy though pure zinc flashing exists.








