21-02-2025, 04:54 PM
(This post was last modified: 21-02-2025, 04:55 PM by DrStrangelove.)
Sometimes the pins will come out from the component side if you wet the remains with fresh solder and use a tweezers to pull gently.
Depends on how lucky you are and if the hole is plated through or not, and whether or not the pins are bent on the solderside.
As stated: I'm a bodger. :D
Depends on how lucky you are and if the hole is plated through or not, and whether or not the pins are bent on the solderside.
As stated: I'm a bodger. :D
