22-01-2025, 05:26 PM
Here is inside (from an Atari forum).
You can melt case or dremmel to connect one side of new holder and on the other left end you need to cut the wire to the top of the old battery.
Also was sold as ODIN.
I did two hacksaw cuts at the two missing pins and chipped with a small screwdriver. Mine was an ODIN on a 486 PC.
Connections
You can melt case or dremmel to connect one side of new holder and on the other left end you need to cut the wire to the top of the old battery.
Also was sold as ODIN.
I did two hacksaw cuts at the two missing pins and chipped with a small screwdriver. Mine was an ODIN on a 486 PC.
Connections
Code:
________
MOT 1 -|° |- 24 VCC
X1 2 -| |- 23 SQW
X2 3 -| |- 22 N.C.
AD0 4 -| |- 21 RCLR
AD1 5 -| |- 20 VBAT
AD2 6 -| DS12 |- 19 IRQ
AD3 7 -| 887A |- 18 RES
AD4 8 -| |- 17 DS
AD5 9 -| |- 16 GND
AD6 10 -| |- 15 RW
AD7 11 -| |- 14 AS
GND 12 -|________|- 13 CS
