28-06-2024, 03:00 PM
Found a case. Using a scrap PC 450W SMPSU case. The two FET heatsinks will sit nicely at the fan with a plain matrix board vertically on the FETs with the high voltage caps etc on it.
A plastic panel in front with the controls and meters.
Not using the PII 333 MHz heatsinks as they are about x2 the size needed. Found a nice pair. I've no sockets for the 230V filament lamps so I'll cut hole in a piece of plain matrix board.
Also found three boxes of old PSUs (from small linear to laptop style "brick" SMPSUs in the attic.
A plastic panel in front with the controls and meters.
Not using the PII 333 MHz heatsinks as they are about x2 the size needed. Found a nice pair. I've no sockets for the 230V filament lamps so I'll cut hole in a piece of plain matrix board.
Also found three boxes of old PSUs (from small linear to laptop style "brick" SMPSUs in the attic.
