Philips 291U / 15 Radio

[Geordie McBoyne]

Done some more work on the Philips 291U replaced the smoothing capacitor and decided to solder the capacitor clamp to the chassis instead of drilling in case i manage to locate later the correct bolt through type . Replaced C15 snipped out tone corrector and mains filter capacitor and Talk Sport at very low volume the audio output stage seems ok as if i touch the volume pot wiper you get a loud buzz . i am getting a HT voltage from the UY 41 is 154 Volts and 110 Volts on the UL41 Anode . Could a waxy cap be leaking ? and I changed the UY41 any advise would be appreciated  here is some pictures of the smoothing capacitor on the chassis.   

  Kind regards Bob