09-04-2024, 06:15 PM
(This post was last modified: 09-04-2024, 06:15 PM by ppppenguin.)
We don't have the correct manuals for the Harris TX. They may be in Lucien's other store in Bedfordshire. We have managed to get a PDF of the main manual for a very similar TX. It's a 4MB file so I don't want to post it here but here's a shot of one page from the installation chapter. The list of tools and materials caused some amusement.
We have the dry high voltage power supply option so the welding kit might not be needed
The photo is the transformer, all 950kg of it, being loaded in Suffolk. Behind it is part of the power supply cabinet with the 30kV six phase rectifier strings hanging from the roof. Also in that cabinet (when fully assembled) are a mere 150kg of smoothing choke and a couple of hefty smoothing capacitors for the 30kV supply.
We have the dry high voltage power supply option so the welding kit might not be needed
The photo is the transformer, all 950kg of it, being loaded in Suffolk. Behind it is part of the power supply cabinet with the 30kV six phase rectifier strings hanging from the roof. Also in that cabinet (when fully assembled) are a mere 150kg of smoothing choke and a couple of hefty smoothing capacitors for the 30kV supply.
www.borinsky.co.uk Jeffrey Borinsky www.becg.tv
