23-11-2023, 12:24 PM
(This post was last modified: 23-11-2023, 12:28 PM by Mike Watterson.)
Maybe designed for chassis punched for B8 edge connect. Most of those valves had same function position, though the numbering is different. Could even be 1940s stock rechecked in 1966!
Perhaps cut tags flush, add washer/insulation/sealing ring and solder to side of each pin's socket. The socket & tag is held in by bottom layer of paxolin, so even if you take it apart the bits are the wrong shape for a narrower profile socket with the tags on the end of individual sockets.
Maybe these are for smaller holes? https://www.ebay.co.uk/itm/276180080501
Or
https://www.ebay.co.uk/itm/374985118779
Perhaps cut tags flush, add washer/insulation/sealing ring and solder to side of each pin's socket. The socket & tag is held in by bottom layer of paxolin, so even if you take it apart the bits are the wrong shape for a narrower profile socket with the tags on the end of individual sockets.
Maybe these are for smaller holes? https://www.ebay.co.uk/itm/276180080501
Or
https://www.ebay.co.uk/itm/374985118779
