11-01-2022, 10:10 AM
I'm modifying the crossover circuit on the 770's speakers that I have as the tweeters and bass units have been changed at some point in the past. The crossover circuit has not been modified (as far as I am aware) and the overall sound is far too top end/treble orientated based on the current cross over configuration. One thing that I cannot figure out is what connects the inductor L2 to R2 as by observation there does NOT appear to be any leads from the inductor to the R2 resistor and on to the +ive tweeter connection? Can anyone advise how this is connected (if at all) but the there is a connection lead from somewhere? I've added a schematic of the old crossover circuit and the modification.
Many thanks in advance
Many thanks in advance
if all else fails...read the instructions!
