A question on Reflex Klystrons, how to pulse?

[Diabolical Artificer]

I have an old Tektronix mains tfmr you can have, one winding is shorted but all others work,that'l give you more than enough oomp. Here's thge specs -
The windings for the transformer 120-0140-00:
18 - 19 6.4 V 6.0 A
22 - 23 6.4 V 4.0 A
24 - 25 6.4 V 0.6 A Insulated for 1350 Volts
27 - 28 6.4 V 8.0 A
6 - 11 195 V 0.320 A
8 - 15 137 V 0.800 A
7 - 14 113 V 0.500 A
5 - 10 113 V 0.500 A
20 - 21 180 V 0.320 A
17 - 26 6.4 V 4.0 A
12 - 13 6.4 V 7.5 A
9 - 16 6.4 V 4.0 A
The two 113v sec wndg's are shorted, but you can use one of them as well as a combo of the others.They'll all need rectifying individually and stacking of top of each other to give you the right HT. FOC, + courier.

Andy.

[AdrianPH]

Hello Andy, I have ask, but if a secondary winding is shorted out, I assume shorted turns will that not overheat the transformer?

It will be a while before I fully decide what to do, trying to read through the pdf I downloaded and deciding which way to go and I must admit to getting a bit lockdown crazy at the moment.

Thanks for the offer.

Adrian

[ppppenguin]

If a winding has shorted turns then the transformer will overheat. It's possible that's not what Andy meant.