Workzone screwdriver charger needed

[boater sam]

Mmmm,  Thanks Trevor, no 2mm with 1mm pin listed.  From Wiki,

There are a number of sizes listed below that appear to be quite similar, and while the tolerances of these connectors are typically indicated as ±0.05 or ±0.03 mm by the manufacturers, there is still ambiguity as to whether two sizes differing by only 0.05 mm (or where the specification is only given to the nearest 0.10 mm) warrants listing them separately here.[original research?]

OD (mm)
ID (mm)
CPD (mm)
Barrel length (mm)
Adaptaplug
Standard
Volts
Plug part numbers
Jack part numbers
Notes2.00
0.60
 
 
 
 
 
 
 
used in newer Nokia phones (AC-3) and Bluetooth headphones
2.35
0.70
 
9.5
A
EIAJ-01
0–3.15 V
Kobiconn 3218-EX
Lumberg 1636 01
Kobiconn 0307-EX (inline)
Canon ACK-800, also used on very old Motorola phones (SPN4364/4365/4366/4474)
2.40
0.70
 
 
 
 
 
Egston 212
 
possibly a rounded-off representation of EIAJ-01
2.40
0.80
 
 
 
 
 
Egston 213
 
 
2.50
0.80
 
 
 
 
 
 
 
Used in Samsung Bluetooth headsets and few tablet PCs
3.00
1.00
 
 
 
 
 
 
 
 
3.00
1.10
 
 
G
 
 
CUI Inc. PP-019
Egston 214
 
Used in satellite radio docks and other devices
3.20
0.90
 
 
 
 
 
CUI Inc. PP-017
 
 
3.30
1.00
 
 
 




The sizes are so close, could you measure it more accurately  please ?  A drill shank for the center pin fit?




Sam.