28-07-2020, 07:38 PM
(28-07-2020, 01:20 PM)Mark Hennessy Wrote: ... For example, a Philips frequency counter that used a filter with wires emerging at right angles from the side, and there no way anything else with a filter will fit the space because the chassis practically touched the bare end of the original.
That picture looks rather like a HP8904A to me. Luckily, a friend bought one of those, meaning I don't have to! Not exactly a high point in UI design
As mentioned, it was the HP 8904A that I replaced the IEC on last week - however, it uses a Schaffner FN 326-3/06 which is, like the one in your Philips kit, a right-angle exit type... you can just see the replacement at the far right of the photo...
sıʌǝɹq ɐʇıʌ `ɐƃuol sɹɐ
ʞɔıu
ʞɔıu
