ВЭФ 12 (Astrad VEF 12 Project) - including a transistor tutorial

[Mark Hennessy]

What's the collector voltage? I am going on 4K7 as 4700. As it's the load resistor for the collector I'd say multiply 4700 by 0.001 to give 4.7. However, with a valve anode you would just use the current tables to drop whatever voltage difference exists between HT and listed anode voltage.

With time, you'll see that it's so much easier to use milliamps and k-ohms with transistor circuits. I'd much rather say "1 times 4.7" than "0.001 times 4,700". You might not believe me now, but try to keep an open mind there...

Anyway, as Ref says, 4.7V across the 4k7 resistor. Good...

So is that the final answer?