I hadn't taken on board the brass plate.
So we're looking at about 180° max travel.
The 25k pot with a 27k from slider to the end of the track will give you 10k max but the law will be a lot smoother than in the previous graph. I'll tweak it and post it again.
A 50k pot and 15k resistor would be better but if you cant find one, you have to do the best with what you've got!
EDIT Having looked at the circuit to see where the 'hot' end of the pot goes, I see it is to the GB battery, so its actual value doesn't really matter. A 6k8 resistor and 25k pot will give a similar law to the 50k/15k plot above..
So we're looking at about 180° max travel.
The 25k pot with a 27k from slider to the end of the track will give you 10k max but the law will be a lot smoother than in the previous graph. I'll tweak it and post it again.
A 50k pot and 15k resistor would be better but if you cant find one, you have to do the best with what you've got!
EDIT Having looked at the circuit to see where the 'hot' end of the pot goes, I see it is to the GB battery, so its actual value doesn't really matter. A 6k8 resistor and 25k pot will give a similar law to the 50k/15k plot above..
