11-09-2016, 09:23 PM
I have just finished building my sixth kit from banggood every one has worked ist time .
As had been said there are no real build instructions but the pcbs are well marked.
the 5 band resistors are hard to read the values and i tend to check them with a meter .
some times 1/4 watt resistors are used when 1/8 watt ones would fit better,and when they say cut the leads short they mean it.
i have not been brave enough to take on any kits with smd components as my eyesight is not as good as it use to be .
good luck with your build Rob.
Rob T
As had been said there are no real build instructions but the pcbs are well marked.
the 5 band resistors are hard to read the values and i tend to check them with a meter .
some times 1/4 watt resistors are used when 1/8 watt ones would fit better,and when they say cut the leads short they mean it.
i have not been brave enough to take on any kits with smd components as my eyesight is not as good as it use to be .
good luck with your build Rob.
Rob T
if its made by hand it can be repaired by hand
