24-05-2015, 05:09 PM
Thanks Lawrence, and Mark. Your great minds are thinking alike. Why did I not think of that.
I'm going down to collect some stuff in Worcs from Steve at Radiocraft tomorrow but will have a go when I get back.
To answer your question Mark, the X-Y even when off is having an effect on the horizontal of both channels. If I get both dots on screen, trying to move channel 2 up the screen with the #2 posn control moves the dot sort of diagonally to the top right, shifting the channel 1 dot to the right horizontally at the same time.
With X-Y selected it works properly giving a full across screen capability.
Despite TR757 being squashed, it still works. I have a voltage changeable with the Y posn. controls at both 110/2 and 110/3 collectors of TR757 and 755 . But can't see any change at the base of TR2.
I was checking out S4 and S2 when it got too cold in the workshop!
PC119 is unbelievably buried!
Thank again for your brain work.
Sam.
I'm going down to collect some stuff in Worcs from Steve at Radiocraft tomorrow but will have a go when I get back.
To answer your question Mark, the X-Y even when off is having an effect on the horizontal of both channels. If I get both dots on screen, trying to move channel 2 up the screen with the #2 posn control moves the dot sort of diagonally to the top right, shifting the channel 1 dot to the right horizontally at the same time.
With X-Y selected it works properly giving a full across screen capability.
Despite TR757 being squashed, it still works. I have a voltage changeable with the Y posn. controls at both 110/2 and 110/3 collectors of TR757 and 755 . But can't see any change at the base of TR2.
I was checking out S4 and S2 when it got too cold in the workshop!
PC119 is unbelievably buried!
Thank again for your brain work.
Sam.
Boater Sam.
