10-04-2013, 11:58 AM
(This post was last modified: 10-04-2013, 12:14 PM by Radio Fixer.)
Screwed up here: don't normally do many inductors. And I was going to miss the bus!
"Oh! and I forgot 2.5mh would be 250mH (again for loss of dot)" WRONG
Guess, continuing the Philips method 2.5mh would be 2m5H and 2.5H could be 2H5
I do have a component library for valves, its cut and paste from a diag I drew earlier!!
And on the Diag the 2K2 should be alongside one of the resistors but you get the principle
Gary
"Oh! and I forgot 2.5mh would be 250mH (again for loss of dot)" WRONG
Guess, continuing the Philips method 2.5mh would be 2m5H and 2.5H could be 2H5
I do have a component library for valves, its cut and paste from a diag I drew earlier!!
And on the Diag the 2K2 should be alongside one of the resistors but you get the principle
Gary
