Identifican request - 3 Valve mains superhet

[Sparks]

There were so many faults and components needing replacing, I took the easier path of a quick job! Plus the fact the bottom row of the tagboard is very difficult to get at. Now it is working perfectly, I can take my time with the re-wire. I am still using the older type 40/60 tin lead solder. I can't manage the new solders, and for a while, I just thought I had lost my soldering skills until it dawned on me that 40/60 tin/lead is now frowned on!
Bob

[Sparks]

Re-wiring is proving rather difficult because of the tagboard, but I have now completed the frequency changer stage, and heaters wiring so the rest should be rather easier. I checked the total HT current, and found it to be 36mA. The Trader sheet shows 44.9, but I am still using 200 Volts HT and the valves may be a bit low on emmission, but the volume and tone are excellent.
Bob