14-07-2017, 08:40 AM
Hi,
I've recently acquired a Roberts RT1 ... working and a UT U7961 ... not working
I'm taking the U7961 apart, to gain better access for voltage measurements etc (I'm an electronic engineer but have no experience of valves, a bit before my time ) and have removed the rear cover, four screws, and the four screws attaching the metal chassis to the rest of the radio.
I've also removed the front M-L button but the chassis still refuses to come out.
I don't want to force anything and break it, but it seems like the two front controls (left and right) are holding it on ... any suggestions please
Also I don't seem to be able to add attachments to my post, not sure if this is finger trouble or something else, as I have a few pictures of what I'm talking about that may be useful.
Cheers,
Martin
I've recently acquired a Roberts RT1 ... working and a UT U7961 ... not working
I'm taking the U7961 apart, to gain better access for voltage measurements etc (I'm an electronic engineer but have no experience of valves, a bit before my time ) and have removed the rear cover, four screws, and the four screws attaching the metal chassis to the rest of the radio.
I've also removed the front M-L button but the chassis still refuses to come out.
I don't want to force anything and break it, but it seems like the two front controls (left and right) are holding it on ... any suggestions please
Also I don't seem to be able to add attachments to my post, not sure if this is finger trouble or something else, as I have a few pictures of what I'm talking about that may be useful.
Cheers,
Martin