[attachment=338][attachment=339][attachment=337][attachment=337][attachment=253]Hello.
Two more of my Capacitor testers made by Hunts in 1947 and in 1949 and in working order but one needs a new neon light 0.5 watt 240 volts SBC.
Regards Kev.
How ironic that they made such nice testers and yet became notorious for the failure of their caps more recently.
Do these testers themselves suffer from Hunts capacitor failure?
Hi Jeremy I restored a Hunts CRB-3 and use it on every restore to check caps. I always find it quite preverse when the HUNTS tester declares a HUNTS capacitor useless.
And yes the caps inside the CRB-3 were naff except the large electrolytic, I tested these on my Heathkit IT-28.
Chris
Hello Jeremy.
I have tested the caps in the two testers and all of them came out ok. I feel that better quality caps were used in Test equipment. The only fault with one of the testers is the Neon lamp not working. It is 0.5 watt 240 volts SBC. I Tested the caps with my Aerovox 75 .
Regards Kev.
They are MES I wonder if you could adapt and fit an MES holder, should be a pretty simple job.
I've attached the picture of the bulb both Kevins' and mine take its an SBC
Chris
[attachment=469]Hello Chris.
A photo of the the Neon lamp 0.5 watt 240 volts SBC.
Regards Kev.
Hello.
I just have to say Thank you to Rob or bushbaby as he go by on the Forum he sent me two Neon lamps for the Hunts Capacitor tester. Top Man Rob Thank you.
Regards Kev.
Hi Kev,
You are most welcome as I really like to see old test kit in fully working condition and its a shame if this doesn't happen because of the lack of a component or two.
Please post some pics for us
Regards
Rob